Performance characteristics: 1, single component, solvent free, moisture curing, strong adhesion, good sealing effect; 2, Gao Chu degeneration, low viscosity, extrusion of good, flow of facade coating, construction is convenient; 3, fast curing, ageing resistance, and low temperature resistance, anti vibration fatigue; 4, 100% solid content, small curing shrinkage; 5, the surface can be coated with excellent; 6, non-toxic, tasteless, does not contain free TDI, belonging to the environmental protection products.
1, remove surface coating of dust, oil, water; 2, according to the needs of the selection of cleaning agents and the base paint (the company supporting); 3, remove the rear end of the metal foil seal, the nozzle fully open thorn nozzle into appropriate cant, squeezing glue gun coating to the construction site can be; 4, the proposed construction temperature of 5 DEG C to 40 DEG C, relative humidity 35%~65% is the best.
Scope of application:
1, automobile, railway vehicles, refrigerated containers weld seam seal; 2, cold storage, ships, pipelines of the adhesive joint sealing; 3, for vehicle body visible part and joints of the body, body sealing gap seal.
This product is room temperature moisture curing type one component polyurethane adhesive. Solvent free, facade coating does not flow, high bonding strength; oil resistance, water resistance, low temperature resistance, resistance to aging, vibration resistance, salt fog resistance, no mildew, non-toxic, tasteless, non corrosive, non polluting, surface paint and coatings, curing speed, construction is convenient,
Use method: 1, remove surface coating of dust, oil, water; 2, except at the rear end of the metal foil seal, the nozzle fully open thorn, the rubber mouth cut into appropriate cant, squeezing glue gun coating to the construction site can be; 3, the proposed construction temperature of 5 DEG C to 35 DEG C, relative humidity of 35% ~ 65% best; 4, no airbag of vehicle maintenance and repair after 1-2 hours you can start, with airbag need 6-8 hours.
Scope of application:
1, the automobile windshield glass directly assembly; sealing 2, automobile, railway vehicles, containers, ships, weld seam;
The one component moisture curing at room temperature
The oil resistance, anti-aging, vibration resistance, low temperature
The bonding strength is high, the design in accordance with the original standard loading
The extrusion and glue not pendulous, glass does not collapse
This product performance is excellent, mainly used in high-grade car 4S stores, service stations and other automobile windshield glass and side window glass assembly, can be used for railway passenger cars, containers, ships, such as bonding and assembling.
Packing specifications: 310ml/pcs 12pcs/box
The facade is not flowing coating
Ensure the reception car antenna the low conductivity
The bonding strength is high, with the back glass processing agent
Support the high performance layer, not pendulous, glass does not collapse
This product applicable to the glass shop automobile windshield glass and the side window glass direct assembly can be used for railway passenger cars, containers, ships, such as bonding and assembling.
Packing specifications: 310ml/pc 24pcs/box 350ml/pc 24pcs/box